F-106 Delta Dart Paper Airplane : Folding Instructions

">
F-106 Delta Dart Paper Airplane (from Amazing Paper Airplanes Facebook Page) Folding Instructions


Step 1 Start with a sheet of letter-size or A4 paper. Fold the paper in half in lengthwise and then unfold the paper. Fold the two top corners toward the center line. Bring the top corners to the center crease.	Step 2 Mountain-fold the paper in half.

Step 2A After the montain-fold the model looks like this.	Step 3 Fold top side diagonally along the line shown in the picture.

Step 4 Pull out the triangle flap under the top side.	Step 5 Fold the right side flap along the right side edge.

Step 6 After step 5, model looks like this. Turn over the model and repeat steps 3-5 for the other side and then open the model as shown in setp 7 picture.	Step 7 Fold top flaps to meet at the center crease.

Step 8 Mountain-fold the top corner along the line as shown in the picture. Then opent the top layers.	Step 9 Fold up the top layer tip. Form the model as shown in step 10 picture.

Step 10 Fold the model in half.	Step 11 Cut the elevators as shown in figure. (about 1/2in) Fold down the wings.
	Step 12 Adjust the wings to be flat. (You may use a piece of paper to make an optional tail fin and use a piece of tape to attach to the model.) Bend the elevators up for the best flight. Now the F-106 is ready to fly!